Discontinued Vinetech HAMAMP RST-1200T 1.2Kw Linear Amplifier

Specifications:

• Built-in power supply and antenna selector
• Dimensions. W37 H17 D43 cm（L14.56”×H6.69”×D16.93”）
• Weight 12.5 Kg（27.5lbs）
• Colour Screen: 12.7cm by 8.89cm（5 inch), resolution 800×480, 65K, 16 Bit RGB
• Displays Multiple Parameters, Status, PEP output, PA Voltage, PA Current, Power Gain, Temperature, SWR, Frequency and Band
• Connects to all Transceivers easily with RF Sensing for Band selection and control
• Frequency Coverage 1.8 Mhz to 50 Mhz including WARC Bands
• Power Output 1.2Kw
• Clean and low distortion output using single 1500w MOSFET
• Spurious emission less than – 60 dB (50 MHz – 65 dB)
• Third order distortion (Double Tone Test) 36 dB (typical)
• Input 50 ohm Unbalanced Matching with SWR less than 1.8:1
• 4 SO239 Antenna Connectors
• Comprehensive Protection Systems including Temperature, Voltage, Current, Reflection, SWR, PW and VRF Maximum Values, Overdrive and Open/ Short Circuit Protection
• Quiet Operation with large heat sink and near silent cooling fan
• Easy to Maintain
• Hardware warnings stored internal to Amplifier using no volatile memory
• Power Supply Voltage Range (100 to 250v), Limited inrush current and pure sinusoidal, Automatic Power Factor correction (PFC)
• Rear mounted RS232 Port for remote operation
• Supplied with carry bag designed for field operation