Moonraker Titan MKII Transceiver Bundle Deal

PLEASE NOTE: New MKII stock - improved version with latest firmware installed

The Titan is a new 10 metre multi-mode Transceiver by Moonraker. Featuring up to 40W of output power that is fully adjustable via a variable control, makes it suitable to be used to drive an external amplifier at a low power level. The large heatsink on the back ensures that the radio stays cool for those long QSO’s.

This radio covers the whole of the 10 metre band and can easily be put into export mode for different markets – which expands its frequency coverage.

Featuring a Hi-Cut filter and Noise Blanker it is well equipped to cut down band noise and enhance reception on receive making contacts easier. Also included is a scan function and a Dual Watch function – useful for monitoring the band to find activity or monitor a pair of favourite most-used frequencies.

The hand mic included features easy to access channel change buttons, a must when using in a vehicle, or if the radio is mounted up out the way. A 3.5mm mono jack on the back of the radio allows a morse key to be plugged in for CW mode, and a secondary 3.5mm jack allows for an external speaker to be connected.

Comes complete with mounting hardware, fused power lead, full instruction manual and hand microphone. To wideband power off the radio, hold down 'EMG & 'PTT' while powering on the radio. Then rotate channel knob to desired band. Tap the 'PTT' to save settings.

Specification

• Frequency range: 28.000 to 29.700 MHz
• Mode: AM/FM/USB/LSB/CW/PA
• Output Power: Adjustable Low ~200mW - High ~40W
• Step: 10Hz, 100Hz, 1KHz, 10KHz, 100KHz
• ASQ on/off
• ECHO on/off
• Hi-cut on/off
• Beep on/off
• Dual Watch
• Noise Blanker on/off
• ANL build-in
• Scan function
• Roger Beep
• LCR (Last Channel Recall)
• Mic gain adjustable
• TalkBack
• Scan list
• TOT
• Digital RFG adjustable
• A-RFG (Auto RFG)