DXE-TB-3P Tilt Base Antenna Mounting System For Hustler Verticals

It can enable an operator to raise or lower an antenna in seconds, while leaving the base of the antenna securely attached to the mounting plate and post.

One person can install, raise and lower, and service their vertical antenna with our stainless steel Tilt Base, just walk it up or down. The Tilt Base prevents potential accidents when climbing a step ladder to tune the antenna, especially on soft ground.

This is an essential tool that has helped countless hams eliminate the possibility of personal injury and damage to their ground-mounted vertical antenna. There is no need to remove brackets from the support posts and you will never again have to lift the entire weight of the antenna in order to tilt it down or tilt it up.

Features

• Mounting Plate Material: Stainless steel
• Mounting Pipe Size: 1.000-2.000 in.
• Mounting Plate Width: 8.000 in.
• Mounting Plate Height: 12.750 in.
• Mounting Plate Thickness: 0.188 in.
• Intermediate Mounting Tube Required: No
• Tilt Base Assembly Weight: 4.50 lbs.