DISCONTINUED ACOM 1400S HIGH POWER AMPLIFIER

The ACOM 1400S is a state-of-the-art amplifier covering all amateur bands from 1.8 to 54 MHz. The proven ACOM 06AT tuner is the optimal option for use with ACOM 1400S. Both devices share the same front panel design and will look magnificent in the shack.

It is based on the latest LDMOS transistor technology. The final PA stage uses a rugged 65 V LDMOS transistor for heavy operation modes. The amplifier as standard is equipped with an Ethernet interface and thus can be remotely controlled via the Internet through the integrated Web interface.

Specifiction

• All amateur bands: 1.8 through 54 MHz
• Rated otput power: 1200 W ±0.5 dB, PEP or continuous carrier, without mode limitation, at 200-264 VAC mains; 600 W if operated at 90-132 VAC mains.
• Intermodulation Distortion (IM3): Better than 31dB below rated PEP
• Harmonic and Parasitic Emissions Output Suppression: -60/-70dB or less (hf/50MHz band)
• Input Impedances: Nominal value: 50 Ohm unbalanced
• RF Power Gain: 14 dB ±1 dB (typically 50 W for 1200 W output power)
• Mains Power Supply Voltage: 100-240 VAC, ±10%, 50-60 Hz, Single phase
• Mains Power Consumption in Low Energy (Waiting) Mode: Less than 1 VA