Connection cable for PDN node

SKU: 37-417 Categories: , , Brand: Awaiting Stock


The SCU-40 connection cable is used to set up a Portable Digital Node Station with the FTM-400XD, FTM-400D, and FTM-100D

Using this new Portable Digital Node Function, users can gain access to the WiRES-X Network directly by using the transceivers PTT and microphone. The need to have an additional radio to talk to a node radio is no longer needed in order to enjoy the WiRES-X Network. Using the SCU-40 cable kit the transceiver can also function as an Access Point for RF communication identical to any previous WiRES-X node.

Firmware is at the Yaesu web site: http://www.yaesu.com.

- FTM-400XD MAIN Ver 4.40/ DSP Ver 4.31
- FTM-400D MAIN Ver 3.40/ DSP Ver 4.31*
- FTM-100D MAIN Ver 2.40/ DSP Ver 4.31/ PANEL Ver 2.10

Users can easily establish and operate a WiRES-X Portable Node Station by directly connecting the FTM-400XD,
FTM-400D, and FTM-100D to the PC with the SCU-40.

Same as the WiRES-X Portable Node with the FT2D, four (4) different types of operation modes are available.
For more detailed information, please refer to the latest operation manual which is posted in our official website

Please also be informed that the latest WiRES-X PC software (Ver 1.510) has been released along with the latest
firmware of the FTM-400XD/FTM-400D and FTM-100D. This software contains some improvements and
optimizations to operate a WiRES-X PDN (Portable Digital Node) with the C4FM transceivers – FTM-400XD, FTM-
400D, FTM-100D and FT2D and a fixed WiRES-X node station with HRI-200.

With the Portable Digital Node function, the flexibility and mobility of the WiRES-X Network will be available all the
time. We believe that this new WiRES-X functionality will contribute to the growth of the YAESU C4FM (System
Fusion) network.

* Please note that while the FTM-400D is supported it does require different MAIN version firmware than the FTM-400XD series.
**If customers are interested in operating his/her node as an Access Point for C4FM digital only or Direct Operation with other C4FM digital nodes
only, only the SCU-20 cable supplied with the FTM-400XD/D and FTM-100D package is required. It would not be necessary that customers
purchase the SCU-40 connection cable kit. If customers are interested in Access Point/ Direct Operation both in C4FM digital/ FM modes, the
SCU-40 Cable Kit must be obtained.
Yaesu SCU-40 Wires-X Portable Station Connection Cables

After updating the transceivers firmware to the latest version that supports the Portable Digital Node Function the SCU-40 cable kit will allow a user to easily establish and operate a WiRES-X Portable Station by directly connecting the FTM-400XD or FTM-100DR to the USB and audio ports of a PC. In this configuration the conventional HRI-200 internet interface kit is not required for the Portable Digital Node function, and no fixed or dynamic global IP address is necessary. Since users do not need to open an Ethernet port, WiRES-X communication from any location is possible - such as Hotel rooms, Airports, Vehicle Wi-Fi, or even Wi-Fi Access Points.

Can't find what you are looking for or require expert product advice? Call us on 023 92 313090
  • Over 20,000 items in stock!
  • Fast dispatch of stock items
  • Trading for over 50 years
  • Price pledge promise