Spiderbeam Spiderpole 22m “Long John”

22m fibreglass pole

SKU: Spider-m 15m Category: Brand: In stock

£379.95

Description

Spiderpole 22m

This is the little brother of the incredible 26m pole. Removing the bottom two segments reduces height by 4m, but makes it a lot lighter and easier to install.

Like all Spiderbeams other poles, the "long john" 22m fibreglass pole is carefully designed to maintain low weight and perfect balance. It can still be installed by "walking up" the pole. As usual, Spiderbeam have tested it thoroughly at the Baltic sea coast where it has weathered all storms without any problems.

The pole starts out very rugged at the bottom (95mm diameter / 2mm wall thickness) and still has 45mm diameter / 1.7mm wall thickness at 13.5m height! The upper sections are slim and light (1mm wall thickness), preventing the pole from becoming top-heavy and keeping it perfectly balanced.

A special reinforcing winding technique - several layers of fibreglass are wound in alternating direction (criss/cross winding) - provides greatly increased lateral and linear strength.

These poles are perfect for building all kinds of wire antennas, especially 80/160m wire GP or inverted L antennas. They can also easily support temporary lightweight 1 Element Quad or Delta loops for 40-10m, and dipoles for all bands, especially when used with open wire feedline. (Most baluns would be somewhat heavy). 4-6 poles could be used to build lightweight beams for 40 or 80m The best (and cheapest) wire to use for building such wire antennas (verticals, loops, dipoles etc.) is AWG 18 (= 1mm diameter) enameled copper wire or similar.

For example a 20/15/10m 1el quad can be installed at 16m height above ground. The Spiderbeam vertical junction box / radial plate makes building wire verticals very easy.

  • high strength professional telescopic fibreglass pole
  • fully extracted length (height)     22m (72ft)
  • transportation length     2.00m (6ft 6")

Specification :

  • weight - 13kg (28lbs)
  • bottom diameter - 95mm (3 3/4")
  • top diameter - 4mm (1/6")
  • wall thickness - 1mm - 2mm  (1/25" - 1/12")
  • number of segments - 13
  • pole material - black fibreglass, UV protected, specially reinforced multilayer winding

The pole comes complete with a set of 12 rubber padded stainless steel clamps and 2 guy rings made from strong belts, for guying the mast the 5th segment and above the 9th segment.

See our range of suitable guying ropes on the accessories tab.

Accessories for this Product

Mastrant ADC

Duplex wire/rope clips

In Stock
Read More

Mastrant ATH

Cable end thimble

In Stock
Read More

Mastrant M-02 MM02031

31m (100FT) 2mm (3/32") guying rope with outstanding perf...

In Stock
Read More

Mastrant M-03 MM003031

31m (100FT) 3mm (1/8") guying rope with outstanding perfo...

In Stock
Read More

Mastrant M-03 MM03100

100m 3mm guying rope with outstanding performance

In Stock
Read More

Mastrant P-02 MP02100

100m high performance guying rope 2mm

In Stock
Read More

Mastrant P-03 MP03100

100m high performance guying rope 3mm

Awaiting Stock
Read More

Nevada MTS-400

3mm Guy end grip (SOLD IN PACK OF 5)

Backorder Available
Read More

Nevada MTS-420

Marine grade stainless steel 3mm simplex wire rope clips ...

In Stock
Read More
Can't find what you are looking for or require expert product advice? Call us on 023 92 313090
  • Over 20,000 items in stock!
  • Fast dispatch of stock items
  • Trading for over 50 years
  • Price pledge promise