INNOV FM-DX Beam

88-108MHz 11 element Beam

SKU: INNOV Z08564-0109 Categories: , Feature: Brand: In stock

£279.95

Description

11-ele 88-108MHz  Beam
Part number: Z08564-0109

A High Performance Broadcast (88-108MHz)   11 ele Beam

Most broadcast band antennas on the market today are very old designs. In fact many were developed using the 'cut and try' methods of optimisation where real world adjustments are made to an antenna and then tests are conducted on a range.

This is not the best way to get the most from any Yagi, especially very wide band examples that need to provide constant levels of performance over a wide range of frequencies. The best method of achieving results is to use the very latest computer optimisation methods available today.

Enter the InnovAntennas broadcast band  High Performance Beam antenna, even weak (DX) stations can be received with ease, no matter where, within the 20MHz spread (that this antenna has), they fall. Take a look at the rolling performance plots below and see how constant the produced gain of the OP-DES can be.

The FMDX range of High Performance Log Periodic Dipole Arrays by InnovAntennas and why they will suit your needs

The FMDX-11 is one of 3 brand new Log periodic designs by InnovAntennas. These have been designed to be strong, light weight and most important of all, to give unparalleled performance from a low-profile package for FM band DX'ing. Many DX antennas provide good gain and F/B that is OK but usually there is a compromise. If the antenna is 2 dimensional (uses one reflector for example rather than multiple reflectors) the antenna can provide broadband performance but F/B will suffer. Some antennas provide good F/B but at the cost of high visual impact through large reflector arrays. The FMDX range provide all the benefits of the concentrated element array with multiple reflectors in a single-plane, low-profile and light weight package.

In addition to the superior electromagnetic design, as with all antennas by InnovAntennas, build is of the highest quality with marine grade stainless steel being used throughout. For the very best in performance and build quality you only need to remember one name, InnovAntennas!

Some of the Mechanical design benefits include:

  1. Marine grade Stainless Steel Fittings*
  2. Original Stauff insulator clamps
  3. Mill finished for highest levels of accuracy

Performance

  • Typical Gain: 9.5dBi
  • Typical F/B: 33dB
  • Gain at 10m (33') above ground: 15.58dBi
  • Power Rating: 3kw
  • Feed Impedance: 75 Ohm or 50Ohm
  • Boom Length: 4.1m - 13'5''
  • Weight: 2.82Kg / 6.21LB
  • Turning Radius: 1.903m / 6.24ft
  • Wind Loading: 0.02 Square Metres / 0.56 Square feet
  • Wind Survival: 90MPH

Specification

This antenna has all elements made from  1/2 inch aluminium thick wall tube. The parasitic elements are also 1/2 inch. All elements are electrically connected to the boom held in place by marine grade stainless steel components.

The boom is 3/4'' inch square (19.05mm) which is in 3 sections. two sections of boom form the feedline and antenna element support, the third section provides a boom support truss.

If you want an antenna to last and perform in all weathers without SWR or bandwidth shifting, this is it.

Accessories for this Product

ConductaSeal

Element jointing paste

In Stock
Read More

Innov RubbaSeal

Liquid rubber feed point sealant

Backorder Available
Read More
Can't find what you are looking for or require expert product advice? Call us on 023 92 313090
  • Over 20,000 items in stock!
  • Fast dispatch of stock items
  • Trading for over 50 years
  • Price pledge promise