Nevada Radio

Yaesu SCU-39

WiRES-X connection cable kit





In Stock

Delivered in 1-2 Working Days

  • Yaesu SCU-39: Image 1
  • Click an image to enlarge it...



WiRES-X connection cable kit

Users can easily establish and operate a WiRES-X Portable Node Station by directly connecting the FT2DR/Eto the PC with the SCU-39.

 The conventional HRI-200 internet interface kit is not required for the Portable Digital Node function, and no fixed global IP address is necessary. Since users do not need to open an Ethernet port, the WiRES-X communication from any location is possible - such as Hotel rooms, Airports, Vehicle Wi-Fi, or even Wi-Fi Access Points.

With the new Portable Digital Node Function, users can gain access to WiRES-X Network directly by using the USB connected FT2DR/E with the radios PTT and microphone. The need to have an additional radio to talk to a node radio is no longer needed in order to enjoy the WiRES-X Network.

The USB connected FT2DR/E can also function as an Access Point for RF communication. Four different types of operation modes are available.
For more information, please refer to the operation manual which is posted on the official website (

Exciting new features of WiRES-X PC Software (V1.50) includes the following two updates:
 Sub-code Function: When selecting DG-ID 00 in the WiRES-X software
(under the transceiver settings)C4FM digital signals of all DG-ID numbers. When a sub-code is set with a value of 01 - 26, the node relays C4FM digital signals with the sub-code that is matched. This will allow multiple open nodes (DG-ID00) to work within the same communication range; this function is useful to avoid interference between nodes.

Digital Only Room: A Digital Room can be set up if desired with the WiRES-X PC Software V1.50
 (Note: The HRI-200 is needed in order to create a room.)

More from Yaesu: All Yaesu | All Yaesu Ready-Made Leads