Nevada Radio


Automatic Antenna Tuner for FT-897 range





In Stock

Delivered in 1-2 Working Days

  • LDG AT897PLUS ATU: Image 1
  • LDG AT897PLUS ATU: Image 2
  • LDG AT897PLUS ATU: Image 3
  • Click an image to enlarge it...


LDG AT-897PLUS Automatic Tuning Unit

If you own a Yaesu FT-897 and want a broad range ATU automatic antenna tuner, look no further!

The AT-897Plus Autotuner mounts on the side of your FT-897 just like the original equipment.

We even added the ability to mount the FT897's original "feet" on the side of the tuner so when you are transporting your rig by the handle, you can safely set it down and not worry about scratching the case.

  • Microprocessor controlled
  • 200 fast memories
  • Switched L tuning network
  • Mounts on the side of the Yaesu FT-897 with four M3-0.5x10 screws (included)
  • Dual function tune control button
  • Continuous coverage 1.8 to 54 MHz
  • Power rating HF: 0.1 to 100 Watts
  • Latching Relays
  • Provides extra CAT Port
  • Tuning time: 1 to 7 seconds, 4 average
  • Antenna impedance: 6 to 800 Ohms (Approximately up to 10:1 SWR)
  • Tunes nearly any coax fed antenna. Use optional Balun for long wires.
  • Power requirements: 11 to 14 volts DC @ 300 milliamps during tune
  • Operating voltage supplied via the CAT Port
  •  Enclosure sizes: 11.5D x 3.25H x 1.5W (measured in inches)

Please note that you need to set the radio baud rate to 4800bps for detection of the tuner by the radio.

More from LDG: All LDG | All LDG Antenna Tuning Units