Nevada Radio

Elecraft SS30DV

25A Switching Power supply

Price:

£159.95

 

Availability:

In Stock

Delivered in 1-2 Working Days

  • Elecraft SS30DV: Image 1
  • Elecraft SS30DV: Image 2
  • Click an image to enlarge it...

Description

SS30DV

25A Switching Power supply

Description

The SS-30DV is designed to supply 25 Amps continuous (up to 5 minutes) and 30 Amps surge at 14.1 VDC. It is the perfect companion supply for the Elecraft K3, K2/100, KX3 with KXPA100 and most other rigs. Cabling can be connected to either the rear binding posts or the front Powerpole connectors.

Included in the box

  • Power supply
  • 4' AC power cord
  • Instructions

Features

  • Front Connection: 2 sets of Powerpole connectors
  • Rear Connection: 1/4 inch binding posts that also accept banana plugs, 1/4 inch ring terminals or compression connections
  • Illuminated Power Switch

Specifications
Electrical specifications:

  • Input Range: 100-120 VAC or 200-240 VAC, 50/60Hz (Switchable)
  • Output Voltage: 14.1 VDC fixed
  • Output Amperage: 25 continuous (up to 5 minutes), 30 surge
  • Internal Protection: Thermal, over current
  • Internal Input Fuse: 6.3 Amps at 115 VAC
  • Ripple Peak-to-Peak Max. <100mVpp
  • Noise Peak-to-Peak Max. <100mVpp
  • Operating temperature rating: 0 ? 50 °C
  • Storage temperature: -20 ? 85 °C

Physical dimensions and materials:

  • Shipping Weight: 4.0 lbs.
  • Overall Dimensions: 6.1 x 5 x 2.5 in (154mm long, 127mm wide, 63mm tall)
  • Fan: Quiet internal cooling fan
  • Machined metal case front bezel

Certifications

  • Meets FCC CFR Title 47 Part 15 Subpart B: Class B, CISPR: 2005 ANSI C63.4: 2003
  • Meets CE/LVD (Low-Voltage Directive 2006/95/EC) standard
  • Meets EMC: EN 55022:206+A1: 2007, 2010, EN 61000-3-2:2006

Powerpole Configuration
The Powerpole connectors mounted on the front panel conform to the RACES/ARES standard orientation.

Input Voltage Selection
The power supply is set up for 115V AC input as shipped from the factory. For 230V AC applications, set the recessed 115/230 input select switch located on the rear of the power supply into the proper position. Positions are identified on the switch. Use a small screwdriver to slide the switch into position. No adjustment is necessary for either 50 or 60 Hz input.

Cooling
The SS-30DV power supply is cooled by convection and forced air cooling (normal airflow around the power supply in combination with a temperature controlled fan to improve cooling at higher levels of use). The fan is activated by a sensor when the temperature rises above 70°C.

More from Elecraft: All Elecraft | All Elecraft Power Supplies