Get back to basics with Yaesu's new FT7800REDualbander. With high power output up to 50 watts on VHF and 40 watts on UHF, and wide receiver coverage, combined with 5 one-touch hyper memory buttons and over 1000 standard memory channels, the FT7800E offers incredible value for money, and is already one of our favourite mobiles.

Boasting a big 50 Watts of power output on 144 MHz, and 40 Watts on 430 MHz, the FT-7800E also includes provision for three lower power levels, so you never have to use more power than you really need. The power level is stored in regular and Hyper Memory registers, too The FT-7800E’s incredible memory channel capacity includes registers for over 1000 channels, each capable of storing a 6-character Alpha-Numeric label. And the memories may be stored in any of the 20 available memory groups; a particular memory channel may also be stored in multiple groups, if desired. The FT-7800E’s DTMF signaling capability includes provision for easy access to Yaesu’s WiRES™ (Wide-coverage Internet Repeater Enhancement System) Internet linking nodes, as well as other linking systems that require a DTMF string for access. Using the optional YSK-7800 Separation Kit, which contains both cabling and a bracket for the remote front panel, you can mount the FT-7800R’s front panel on the vehicle’s dash board, then stow the radio’s body under the seat or in some other convenient, out-of-the-way location. The cables are approximately 20 feet (6 m) in length. Five front panel keys allow complete transceiver configuration status to be stored for convenient one-touch recall. So you can set up favorite frequencies in each operating band, including the receive-only bands, then recall them with a single touch of a button! The FT-7800E provides receiver coverage from 108 to 520 MHz, and 700 to 999.99 MHz (cellular blocked, USA-Version), so you have available a wide range of monitoring excitement, including AM Aircraft, Public Safety, Government, Business, and, of course, Amateur communications. The synthesizer steps appropriate for the operating band are automatically selected, too!

• High power output : 50w/40w VHF/UHF
• TX : 144 -146 Mhz (148 optional)
• TX : 430-450Mhz
• Steps : 5/10/12.5/15/20/25/50/100Khz
• Modes : F3E, F2D, F2A
• Wide RX : 108 - 999Mhz (with gap)
• Supply voltage : 13.8v negative ground
• 5 One Touch Hyper Memories
• CTCSS and DCS tones fitted
• "WIRES" Internet Linking Compatible
• 1200/9600 bps packet jack
• Large Omni-Glow illuminated display
• 1000 Memory channels
• Programmable mic keys
• Direct frequency input (with MH-48A8J)
• Smart Search and scanning facilities
• YSK 7800 optional separation kit available
• Auto power-off function
• Time out timer  ( TOT)
• RF Squelch feature
• Size : 140 x 41 x 168mm (WHD)
• Weight : 1 Kg

Separation kit to suit the Yaesu FT-7800R Twinbander

This is the very popular separation kit to remote mount the front panel of the FT7800R.

The kit consists of the following parts :

• Front Panel Nest   1 pc
• Controller Extension Cable 1 pc
• Speaker Extension Cable 1 pc
• Double sided adhesive tape 1 pc
• Mounting Screws, washers and nuts
• Instruction manual