Just arrived !!   Latest Batch of these superb automatic antenna tuners from Palstar, now with latest revision firmware.

New Auto Antenna Unit In Stock . The latest version of the Palstar AT-AUTO 1500 watt auto-tuner has finally arrived. Hams have enjoyed the benefits of low power auto-tuners for years, but now Palstar takes it to the next level and offers auto-tuning with a power rating of 1500 watts. Like all Palstar products the AT-AUTO was designed by Hams for Hams carrying on the Palstar tradition for high-quality products designed and made in the USA. The AT-AUTO features a 2 line large print display for reading the status of antenna feed, frequency, and up to 32 channels of memory. As on all Palstar tuners, the AT-AUTO has a custom built capacitor for differential tuning and a custom built ceramic body roller inductor. What sets the AT-AUTO apart from other tuners is the innovative engineering of software based tuning controlling two high-speed processor controlled stepper motors. As on all Palstar tuners the front panel and top cover are powder coated. Integrated into the AT-AUTO is Palstar's Active Peak/Peak Hold watt meter. This allows you to measure and display forward power, reflected power, and SWR simultaneously on it's dual movement meter system in the frequency range. The meter can display either peak or average power readings with 300 and 3000 watt range settings. Like most Hams you've probably tried tuners made by the "other" guys. If you're ready for a switch to high-quality American Made products the AT-AUTO antenna tuner is the cutting-edge of Palstar technology. When you buy a Palstar tuner you're not just buying a piece of quality equipment - you're buying a product for a Made in the USA manufacturer carrying on the American Ham tradition.

• 1500 Watts single tone, high efficiency, low tuner losses and wide Z range 160m to 20m (1200+/-ljl1200), 10m to 15m (1000+/-j1000)
• Tuning time 1-30 seconds with high-speed processor controlled stepper motors
• Serial port for field upgradeable software from Palstar website
• Display with 2 line large print display for status of antenna feed, frequency, and memory
• Custom large plate variable capacitors at 5kV Ceramic body roller inductor (28 uH) wound with 12 ga plated solid copper wire
• Crossneedle Peak, Peak-Hold metering with backlighting (wall transformer supplied)
• Chassis and top cover are .090 ga. aluminium iridite coated and top cover is powder coat finished
• Dimensions: 12 1/2" wide x 5 1/2" high x 16" deep Weight: 25 lbs