Alinco's
New Dual-Band 2m / 70Cms Handheld, the DJ596 is a no-nonsense, easy to operate
radio, with ample power out to hit those repeaters, or just rag-chewing
simplex.
Full of advanced features, the DJ-596 offers simple programming & operation,
powerful output & the optional capability of adding digital voice communications
to your operations. CTCSS & DCS encode+decode are standard, along with a variety
of tone bursts for repeater access or selective calling.
The DTMF pad is standard & DTMF sequences can be stored in autodial
memories. Convenience features include direct frequency input, alphanumeric
channel labels & 100 memory channels that can each store up to 15 operating
parameters.
General Frequency range : TX&RX 144-145.995Mhz
430-439.995Mhz RX: 136-173.995Mhz / 400-511.995Mhz
- VHF/UHF Tx/Rx including x-band split operation
- 100 memory channels, any mix of UHF/VHF
- Alphanumeric channel labels
- Direct frequency input from keypad
- CTCSS, DCS encode & decode
- Tone bursts
- Three scan modes
- Operating mode F2 / F1E(Op: digital)
- Channel steps 5, 10, 12.5, 15, 20, 25, 30KHz
- Memory channel 100 channels + 2 quick recall (CALL)
- Antenna Connector BNC (50ohm unbalanced)
- Frequency stability +/- 2.5ppm TCXO
- Power supply requirement 6.0 - 15.0V DC negative ground
- Current drain Approx. 1.2A TX VHF at 13.8V DC
- Usable temperature range -10 - +60c (14 - 140F)
- Size 56mm(W) x 124mm(H) x
36.5mm(D) 2.2''(W) x 4.88"(H) x 1.44"(D)
- Weight Approx. 310g (11oz) with EBP-50N
and EA98 whip antenna
- CTCSS tone encoder/decoder fitted
- Digital Coded Squelch encoder/decoder 104 codes
- Transmitter
Output power Approx. 5W at 13.8V DC V/UHF
- Approx. 4.5W VHF with 9.6V packs
- Approx. 4.0W UHF with 9.6V packs
- Approx. 2.5W V/UHF with EBP-56N
- Approx. 0.8W Low position
- V/UHF
V/UHF Modulation system Variable reactance
- Spurious emission Less than -60 dB
- Maximum frequency deviation +/- 5 KHz
- Receive system Double-conversion superheterodyne
- Sensitivity (-12dB SINAD) Less than -15.0dBu
- Selectivity -6dB: 12KHz or more
- Audio output power More than 200mW
Optional Battery Packs /Accessories
-
EBP-50N Ni-MH High 9.6V 700mA
-
EEBP-56N Li-Ion Mid 7.4V 1000mA
-
EBP-51N Ni-MH High 9.6V 1500mA
- EDC-94 / 220VTrickle charger
- EDC-97E Ni-MH charger (240V)Rapid Charger
-
EDC-111E Li-ION charger ( 240V)
-
EDC-36 Mobile DC cable with a noise-filter
-
EDC-43 Mobile DC cable
-
EDC-37 External DC power cable
-
EMS-59 Speaker-microphone
-
EMS-47 Speaker-microphone
-
EME-4 Earphone-microphone
-
EME-20 Earphone-microphone
-
EME-12A earpiece with VOX
-
EME-13A speaker with VOX
-
EME-6 earphone
- ESC-36 Soft Case
- EJ-47U digital-voice modulation unit
Product intended for properly licensed operators.Permits required for MARS/CAP use.
Specifications subject to change without notice or obligation. Performance specifications only apply to amateur bands