Comet 3K-054M - High quality cable assembly

Deluxe Cable Assembly. 4m  in total length including 18 inches of RG-188A  teflon coax for easy entry from a lip-mount, without causing wind noise, coax damage or water leaks. Choice of PL259 or N type connector.

• Comet - 3K-054M/N - cable assembly with SO239 output
• Length - 4m
• High quality RG188A 18" lead in for easy install
• Connectors - PL259 or N type available

HM-10 Conversion Lead N to BNC

Comet M24M Compact Dualband Magnetic Mobile  Antenna  2m/70Cms

A new product, a very nicely finished dual band magmount antenna, designed for the popular 2m and 70 Cms bands with a useful gain of 1.7/ 4.1 and a power rating of 80watts. Overall length is only 0.48m, and the antenna comes supplied with approx 4m of high quality cable and fitted  PL259. Finished in satin black .

• Comet M24M - Dualband antenna
• Frequency - 144/433Mhz
• Gain - 1.7/4.1
• Power rating - 80 watts
• Cable - 4m length
• Finish - satin black

The Comet MCB11 - tried and tested  by our John (caravan boy) Gordon

A high quality drive over mast support base plate. Used by many radio amateurs who park a car wheel on it for use with a beam or other antennas. When used under the jockey wheel of any caravan it makes an ideal support for your TV aerial.
As an added bonus it also stops the jockey wheel sinking into soft grass.

John's review of this product : -  I am very impressed with the Comet MCB II drive over base plate,  it is very well made and will serve me well on my very frequent holidays. I have just returned from one this week, and many people on site commented on this base plate, and thought it was a great product !

Comet MG4M - Large limpet style Magnetic Mount

A strong, powerful 110mm magnetic mount fitted with SO239 sockcet, and 4m of high quality cable with fitted PL259 Plug.
Will be suitable for a large variety of mobile whips, and comes finished in a black satin look.

• Comet MG4M - Limpet magmount
• Diameter - 110mm
• Cable assembly - 4m fitted
• Connector - PL259 plug fitted
• Finish - black satin

Comet MGSRM - Chrome Finish Magnetic Mount + Cable

This magmount will accomodate most types of mobile whip fitted with the very popular SO 239 fitting,
Comes with Chrome finish, and supplied with approx 4m of high quality cable and fitted PL259 Plug. Diameter is approx 78mm.

Comet MGM-58  - Magnetic Mount 85mm

Comet RMS - New Gutter/Magmount Combination

A new idea from Comet, no gutters ?? No problem with this go anywhere magnetic mount with built in gutter mount for more flexible adjustment. Just use a cable of your choice to complete the installation. Can be used at most angles to make the job of fitting your mobile antenna that much easier.

Comet RS-700 - Gutter Mount

A very strong and well designed gutter mount, fully adjustable and finished in a black satin look. Ideal where the need is for a safe and strong clamp on fitting. Will accept the matching cable assemblies from Comet, or of course you can use your own. Supplied with 2 x Allen Keys for secure fixing.

Comet RS-730 Hatchback/Trunk Mount

A very strong and well designed hatchback/trunk mount, fully adjustable and finished in a black satin look. Ideal where the need is for a safe and strong lip type  fitting. Will accept the matching cable assemblies from Comet, or of course you can use your own. Supplied with 2 x Allen Keys for secure fixing.

Comet RS-6 - Adjustable Roof Rack Mount

A very clever design, with a chrome finish, this mounting will adapt to most roof racks or any surface you can clamp securely too with the 4 x locking screws. Can be used with any Comet cable assemblies, or use your own.

Comet RS-550 - Deluxe Roof Rack Mount

A very strong roof rack mount, fully adjustable and finished in a black satin look. Ideal where the need is for a safe and strong roof rack  fitting. Will accept the matching cable assemblies from Comet, or of course you can use your own. Supplied with 2 x Allen Keys for secure fixing.

Comet UB-1 - Trailer Mount for HF Antennas

An extremely well made and supremely strong trailer mounting bracket design, will safely support your large HF whips etc. Top plate assembly is left with a large centre hole and 3 x boltholes to secure the base of the antenna. A typical example of fitting would be to use our own Alinco 9' whip and base assembly  ES-HFM1 which fits perfectly onto the UB-1 top plate. This would cover 80m-10m with suitable tuner to make HF operation very convenient and straightforward.